Impact of a Jet — MOE Lab Tender Details

A self contained floor standing apparatus should have 2m*1m Stainless steel tank, tiltable using a dual linked jacking system  
The system shall consist of 8 Stainless steel spray nozzles with the dimension of 1/8 BLM 6.0 – 60 SS will be mounted on an adjustable height gantry  
The hydrology system shall have to be equipped with two flow meters 3 Litre /min & 5 Litre /min to measure and adjust the inlet flows  
The hydrology system shall contains an outlet tank allowing both water and sediment flow to be measured  
Two French drains two well points and 20 manometer tapping points linked to a manometer bank shall be provided  
Discharge nozzle inside shall be built with clear acrylic cylinder for easy view 

Quick release fitting for easy connection to hydraulics bench 

Diameter of Nozzle shall not exceed 8mm  
Distance between nozzle & target plate shall not exceed 20mm   
Diameter of target plate shall not exceed 36mm   
The system should be provided with four target plates - 180°  hemispherical target, 120° cone target , flat target & 30° target  
The Hydraulic bench shall be designed as a portable and self-contained service module   
The bench shall be constructed from light weight corrosion resistant plastic with wheels for mobility  
The bench consist of centrifugal pump with maximum head of 21m water and maximum flow of 1.35 litres/sec  
The motor rating shall be 0.37KW 

The sump tank capacity shall be 250 litres with high flow volumetric tank of 40 litres and low flow volumetric tank of 6 litres 

The Height of working surface shall be 1 metre above floor level  
The bench shall comprises of stilling baffle which reduces turbulence and a remote sight tube with scale gives an instantaneous indication of water level  
A dump valve operated by a remote actuator should help  to drain measuredvolume of water to the sump in the base of the bench for recycling purpose