Product Description
Summer Air-Conditioning System for Thermodynamics Lab Equipments
Technical Specification
Objectives of the experiment:
1. To measure the cooling capacity of the system
2. To calculate Coefficient of Performance (COP)
3. Plotting psychometric chart from the measured dry and wet bulb temperatures and barometric pressure
4. To estimate dehumidification rate
5. To estimate cooling coil by-pass factor
6. To study the effect of pre-heating and re-heating
Technical Specification:
a) REFRIGERANT : R-22/R-410a
b) HERMETICALLY SEALED COMPRESSOR
Capacity : 1.0 TR
(at 7oC evaporator, 54oC condenser temperature, 35oC ambient air temperature)
Type : Reciprocating / Rotary
c) AIR COOLED CONDENSER
Type : Forced convection air cooled Multi row fin and tube type
d) CONDENSER COOLING FAN
Type : Forced Draft
e) EVAPORATOR : Forced convection multi-row fin and tube type
Fan for Evaporator : Forced draft with variable flow
f) AIR-CONDITIONING DUCT
Material : FRP
Electrical Pre-heater with variac : 1No. with 1 kW
Electrical Re-heater with variac : 1No. with 1 kW
EXPANSION VALVE
THERMOSTATIC EXPANSION VALVE AND CAPILLARY TUBE ARE IN PARALLEL
a) THERMOSTATIC EXPANSION VALVE : 1 NO. Make : Danfoss / Sporlan
Variation in flow rate : by adjusting the TEV screw
Type : Internal equalizer type
Solenoid valve
b) CAPILLARY TUBE : 1 NO.
REFRIGERANT FLOW MEASUREMNT : 1 No
Type : Rotameter
Range : 10 to 100 g/s
Accuracy : 1 g/s
HAND SHUT OFF VALVES : Before and after each component
FILTER DRIER : 1 NO.
PRESSURE GAUGES : 1 NO.
Range : 0 to 300 psi
Type : Bourdon
COMPOUND GAUGES : 1 NO
Range : -30 “ Hg to +150 psi
Type : Bourdon
HP/LP CUTOUT : 1 NO.
Range : 0 to 300 psi
Make and model : Danfoss / Sporlan
DIGITAL DUAL WATT METER FOR COMPREESOR AND HEATERS
Range : 0 to 20 amps
Range : 5000 watts 1ph
Watt resolution : 1 watt
Type : 2 RMS
Isolation : Electrically isolated
No. of displays : one, 4 digit
Computer connectivity : through RS485 port on back panel.
Power : 230V±20% ac, 50Hz.
Operating temperature : 0-50°C
DIGITAL TEMPERATURE INDICATOR : 1 set
Temperature range : -30 to 199.9 deg.c. Resolution : 0.1 deg.c Type of sensor : k-type thermocouple. No of channels : 8 channels (2 channel for WBT) No. of displays : one, 4 digit
Power : 230V±20% ac, 50Hz.
Operating temperature : 0-50°C
ELECTRONIC DIMMER : 2 NO
Range : 230 vac
Type : variable
AIR FLOW MEASUREENT
Type : Orifice plate with inclined tube manometer